List of Errata and Addenda

From Spare Time Gizmos' Wiki

Revision as of 09:02, 12 February 2012 by David Williams (Talk | contribs)
Jump to: navigation, search

Contents

Elf 2000 Main Board


  • DS1210 VBAT2 grounding issue
On the Elk2K main board, chip U5, the DS1210, MUST have pin 7, VBAT2, tied to ground (Pin 4).
http://groups.yahoo.com/group/sparetimegizmos/message/4258
http://groups.yahoo.com/group/cosmacelf/message/8644
DS1210 datasheet PDF: http://www.jameco.com/Jameco/Products/ProdDS/114198.pdf


STG1861 Board




Disk/UART/RTC/NVR Board


  • There is a minor errata on the Disk/UART/RTC/NVR Board. On U7, the 16C450 UART, pin 36 /CTS is an input which is not connected to anything. As far as I can tell from the datasheet this IC does not have pullups fitted so this pin should be connected to something. On my board I have run a wire from /RTS pin 32 to /CTS pin 36.

Hex Keypad

---

---

Elf 2000 Main Page

Personal tools