SBC6120/FP6120 Group Buys

From Spare Time Gizmos' Wiki

Jump to: navigation, search

Contents

[edit] What is it ?

SBC6120 and FP6120 nicely framed

The SBC6120 is a replica of a 1960s/70s vintage DEC PDP-8 computer. It uses the Harris HD6120 "PDP-8 on a chip" CPU and started off as a single board computer the size of a 5-1/4" hard disk (and hence the name, "SBC6120"). Everybody wanted a lights and switches front panel, and a couple of years later I designed the FP6120 ("Front Panel 6120") that you see in the photos. The SBC6120 is fully operational and functional without the front panel - this is handy when assembling the kit, because it's possible to assemble and test the SBC6120 before the front panel is finished. The reality is that no one ever wants one without the other, and so the SBC6120 and FP6120 are always sold together as a set.

The HD6120 CPU used in the SBC6120 is the same one used in Digital's DECmate "personal" computers and is fully software compatible with a PDP-8/E. The front panel is fully functional and has the same complement of lights and switches as a real PDP-8/E. It measures 15" by 8-1/2" and is about 3/4ths scale when compared to a real PDP-8. The SBC6120 will run most software written for a PDP-8, including DEC's OS/8 disk operating system. The SBC6120 has an IDE disk interface that can be used with a real drive or (more commonly these days) a CompactFlash card or SSD.

To find out more, read the manuals for the SBC6120 and the FP6120.

[edit] Why a group buy ?

Debee and the SBC6120

Originally Spare Time Gizmos stocked and sold SBC6120 and FP6120 kits as regular items, and many hundreds were sold that way. However some of the parts used are custom made, such as the faceplate, which is laser cut and silk screened, or the LED shadow mask, which is CNC machined. Many other parts, for example the paddle switches, have to be special ordered from the manufacturer even though they are "stock". All these items have minimum order quantities and can only be purchased economically in large batches. As orders for the SBC6120/FP6120 dropped off, the cost of carrying these items in inventory became prohibitive and Spare Time Gizmos stopped stocking the SBC6120/FP6120. The only practical way to sell them now is in batches of at least 25 to 30 units. Several such group buys have been done in the past, and this will be the fourth one.

[edit] What do I get ?

The purpose of the group buy is to batch up all the "unobtainium" parts that you simply cannot buy anywhere else. To that end, Spare Time Gizmos will supply a partial kit for the SBC6120 and FP6120 containing[1] -

  • The beautiful FP6120 faceplate, silk screened in five colors and laser cut
  • SBC6120 bare PC board (four layers, silk screened and solder masked)
  • FP6120 bare PC board (two layers, silk screened and solder masked)
  • One NOS HD6120 PDP-8 CPU chip
  • A set of 20 paddle switches for the FP6120
  • A custom machined LED shadow bar for the FP6120
  • Three 64Kx4 SRAMs
  • Two 27C256 EPROMs pre-programmed with BTS6120
  • Five pre-programmed PLDs (three for the SBC6120 and two for the FP6120)
  • Two stacking bus connectors used to connect the SBC6120 to the FP6120

That's all - the rest of the parts you will need to supply yourself. You should expect to spend another $100 to $200 for the remaining PCB mounted components, depending on how well stocked your parts box is. And of course that doesn't include an enclosure, terminal, disk drive or power supply. There is a complete parts list in the back of the SBC6120 and FP6120 manuals, and there are also some more current lists, complete with DigiKey and Mouser part numbers, in the files area of the Spare Time Gizmos Yahoo! Group.

If you prefer, a fully assembled and tested unit is available for an extra charge.

[edit] How do I sign up ?

Closeup of the front panel

That's easy - visit our project page on Kickstarter and sign up as a sponsor. A pledge of $599 gets you the partial kit as listed above, and a pledge of $999 gets you an assembled unit ready for framing.

[edit] Where can I get more information ?

  • Wondering what's going on? Check the Project Updates on the Kickstarterpage.
  • There are full manuals, including assembly instructions and parts lists for the SBC6120 and the FP6120.
  • Steve Gibson has some wonderful pages and videos that explain both the original PDP-8 as well as the SBC6120 specifically.
  • Steve has also provided details of the picture frames he used for his SBC6120s.
  • There is a Yahoo! Group for builders of all Spare Time Gizmos kits. You can post your technical questions there. And be sure to browse the group archives too - there are lots of pictures and files related to past SBC6120 builds.
Personal tools